| DOI | Trouver le DOI : https://doi.org/10.1016/j.finel.2013.02.003 |
|---|
| Auteur | Rechercher : Gariépy, A.; Rechercher : Larose, S.1; Rechercher : Perron, C.1; Rechercher : Bocher, P.; Rechercher : Lévesque, M. |
|---|
| Affiliation | - Conseil national de recherches du Canada. Aérospatiale
|
|---|
| Format | Texte, Article |
|---|
| Sujet | Deformed shape; Different geometry; Finite Element; Local curvature; Manufacturing process; Model parameters; Peen forming; Small-scale tests; Aerospace industry; Boundary conditions; Rockets; Shot peening; Trajectories |
|---|
| Résumé | Peen forming is a manufacturing process commonly used in the aerospace industry to shape large and thin panels such as wing and fuselage skins and rocket panels. Due to the large size of the components, this process is generally performed by moving the parts through a peening enclosure or by moving peening equipment following a trajectory on the parts. Previous research on peen forming simulation has rarely considered the influence of the peening pattern on the resulting deformed shape. The purpose of this work was therefore to evaluate experimentally and numerically this effect using small scale tests. A simple model was proposed to simulate incremental deflections as the shot stream traveled over the samples. Model parameters were calibrated experimentally and then applied to a different geometry for validation. Finite element analyses correctly predicted the complex radius distribution arising from the peening path and the constraints applied to the sample during peening. © 2013 Published by Elsevier B.V. |
|---|
| Date de publication | 2013 |
|---|
| Dans | |
|---|
| Note | Erratum published in volume 74, page 111, October 2013. DOI: 10.1016/j.finel.2013.07.006 |
|---|
| Langue | anglais |
|---|
| Publications évaluées par des pairs | Oui |
|---|
| Numéro NPARC | 21269714 |
|---|
| Exporter la notice | Exporter en format RIS |
|---|
| Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
|---|
| Identificateur de l’enregistrement | 7d035bcf-b2cf-4c8f-aba4-69ad6cc6fde6 |
|---|
| Enregistrement créé | 2013-12-13 |
|---|
| Enregistrement modifié | 2020-04-22 |
|---|
