DOI | Trouver le DOI : https://doi.org/10.1121/1.4800957 |
---|
Auteur | Rechercher : Zeitler, Berndt1; Rechercher : Schoenwald, Stefan1; Rechercher : Gover, Bradford1 |
---|
Affiliation | - Conseil national de recherches du Canada. Construction
|
---|
Format | Texte, Article |
---|
Conférence | ICA 2013 Montreal, 2-7 June 2013, Montreal, Canada |
---|
Sujet | Impact sound insulation; power injected; source and floor impedance |
---|
Résumé | Many researchers have posed the question of whether the standard tapping machine simulates the impedance of real sources well enough to properly judge the impact sound insulation performance of a floor. Proposed solutions such as the modified tapping machine, the bang machine, and ball were results of these investigations. Recent data collected on bare (wood and concrete) floors, suggest that in the low frequency range, the impedance of the source has no influence on the power injected into the floor. This is presumably due to the fact that the bare floors have much higher impedances than most common sources, meaning only the blocked force of the source influences the injected power. This furthermore suggests that modifying or redeveloping the source is not necessary, and that through use of an appropriate weighting curve a single number rating that correlates well with subjective measurements can be defined. Supporting objective and subjective results are presented. |
---|
Date de publication | 2012-06-02 |
---|
Dans | |
---|
Langue | anglais |
---|
Numéro du CNRC | NRC-CONST-56112 |
---|
Numéro NPARC | 21268869 |
---|
Exporter la notice | Exporter en format RIS |
---|
Signaler une correction | Signaler une correction (s'ouvre dans un nouvel onglet) |
---|
Identificateur de l’enregistrement | 52b44970-64b3-4817-9090-55c5c8b4ddeb |
---|
Enregistrement créé | 2013-11-20 |
---|
Enregistrement modifié | 2020-04-21 |
---|