Download | - View accepted manuscript: Machinability of green powder metallurgy components : Part II. Sintered properties of components machined in green state (PDF, 668 KiB)
|
---|
DOI | Resolve DOI: https://doi.org/10.1007/s11661-007-9187-5 |
---|
Author | Search for: Robert-Perron, Etienne; Search for: Blais, Carl; Search for: Pelletier, Sylvain1; Search for: Thomas, Yannig1 |
---|
Affiliation | - National Research Council of Canada. NRC Industrial Materials Institute
|
---|
Format | Text, Article |
---|
Abstract | The green machining process is virtually a must if the powder metallurgy (PM) industries are to solve the lower machining performances associated with PM components. This process is known for lowering the rate of tool wear. Recent improvements in binder/lubricant technologies have led to high-green-strength systems that enable green machining. Combined with the optimized cutting parameters determined in Part I of the study, the green machining of PM components seems to be a viable process for fabricating high performance parts on large scale and complete other shaping processes. This second part of our study presents a comparison between the machining behaviors and the sintered properties of components machined prior to or after sintering. The results show that the radial crush strength measured on rings machined in their green state is equal to that of parts machined after sintering. |
---|
Publication date | 2007-06-01 |
---|
In | |
---|
Language | English |
---|
Peer reviewed | Yes |
---|
NRC number | NRCC 49387 |
---|
NPARC number | 15787760 |
---|
Export citation | Export as RIS |
---|
Report a correction | Report a correction (opens in a new tab) |
---|
Record identifier | f96a8d1d-d36f-48ed-ae19-347070e7a7d8 |
---|
Record created | 2010-07-07 |
---|
Record modified | 2020-05-10 |
---|