Wake survey gear modifications for CPF Model IOT-691

AuthorSearch for:
TypeTechnical Report
Series titleStudent Report
SubjectWake Survey; CPF Model IOT-691 Stiffness Tests; Self-aligning Foil
AbstractThis report describes the modifications required to adapt the wake survey gear to CPF model IOT-691 for Project #422104 (CPF Stern Flaps). Modifications include lengthening of the vertical and horizontal posts, increasing the diameter of the vertical post to maintain the stiffness of the original configuration, and fabrication of a new stiffer table bracket. New farings were also designed to accommodate the increased dimensions of the other new components. The stationary foil was also replaced with a new self-aligning foil in an attempt to reduce unwanted lift due to improper alignment. Stiffness tests were performed on the wake survey gear. The results and implications of the stiffness experiments are also discussed.
Publication date
PublisherNational Research Council Canada. Institute for Ocean Technology
PlaceSt. John's, NL
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number6417
NPARC number8894850
Export citationExport as RIS
Report a correctionReport a correction
Record identifierf181a1a2-2f4a-4c2a-a757-87dbe508c1ba
Record created2009-04-22
Record modified2016-10-03
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: