Pressure-sensitive paint measurements on a moving store in the NRC 1.5 m blowdown wind tunnel

  1. (PDF, 1 MB)
DOIResolve DOI:
AuthorSearch for:
Proceedings title32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference, 13-17 June 2016, Washington, D.C.
Conference32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference Washington, D.C.
AbstractThe pressure-sensitive paint technique (PSP) is used to measure the model surface pressures in wind tunnel testing. In the NRC 1.5 m blowdown wind tunnel, the testing time is limited between 10 to 100 sec, depending on the mass flow rate and the tunnel geometry (2D or 3D test section). Traditionally, production PSP testing required a stationary model during the image acquisition. In order to optimize the testing time, a novel approach for PSP testing in production wind tunnels has been implemented to acquire PSP data on continuously moving objects. This type of testing (pitch and roll sweeps) is the usual method of testing in the 1.5 m blowdown wind tunnel, when conventional instrumentation is used (balance forces and pressure tap data). The measurement method is based on the single shot lifetime method, using UV-LED excitation pulses and 49 Hz image acquisition with a scientific CMOS (sCMOS) camera. The method was demonstrated on the fins of a generic store, tested at M = 0.6, 0.8 and 1.0, at angles of attack from -10° to 20°, and moving at variable pitch rates of 3°/s, -6°/s and 9°/s. The PSP data on the moving model (pitch sweep mode) was compared to PSP data on steady model (pitch step mode), to determine the maximum acceptable pitch rate. The store model was not instrumented with pressure taps and the PSP data from the pitch sweep test was compared with computational fluid dynamics (CFD) simulations. A single Cp offset from the CFD simulations was used to compensate for the model global temperature changes.
Publication date
PublisherAIAA Association
AffiliationAerospace; National Research Council Canada
Peer reviewedYes
NPARC number23000427
Export citationExport as RIS
Report a correctionReport a correction
Record identifiereb2ee871-835c-4c21-82d5-36c44ba3a252
Record created2016-07-15
Record modified2016-07-15
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: