Flexible Link Analysis

  1. (PDF, 262 KB)
DOIResolve DOI: http://doi.org/10.4224/8895372
AuthorSearch for:
TypeTechnical Report
Series titleLaboratory Memorandum
SubjectAlgor?s FEMPRO; CadKey; flexible link; dynamometer
AbstractAn analysis was done on varying designs for flexible links to determine how the mechanical properties of the link changed depending upon slight design changes. The analysis was performed by varying the length of the small tapered section center by a value based on its diameter multiplied by 0 to 6 times. The length of the center of the link was varied depending on the length of the ends (either 0.5" or 0.25") so that the overall height of the link remained at 3.5" with 0.5" ends and 3" with 0.25"ends. Algor's FEMPRO was used to perform bending and compression tests on the links with a one-pound load. From the deflections obtained, the stiffness of the links could be calculated in both bending and compression. From this the stiffness ratio could be found. For design purposes, the stiffness ratio had to at least greater than 5000:1 to ensure proper performance of the links in the dynamometer. Overall, all link variations obtained a ratio greater than 5000:1 excluding the shortest length link with 0x tapered section center. In addition, a stress analysis was performed on the links using FEMPRO. For this a proper mesh on the link had to be created in Cadkey and then imported in FEMPRO. Only a select few link were used in the stress analysis since the overall stress had little to no variation between different links. Overall, a stress of 43500 psi was obtained and this value did not change more than 300 to 400 psi in all the links tested.
Publication date
PublisherNational Research Council Canada. Institute for Ocean Technology
PlaceSt. John's, NL
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number6019
NPARC number8895372
Export citationExport as RIS
Report a correctionReport a correction
Record identifiere5467a69-78f1-4680-b634-f97fb447311c
Record created2009-04-22
Record modified2016-10-03
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: