Simulation of the resilient modulus test using the discrete element technique

  1. (PDF, 251 KB)
AuthorSearch for:
ConferenceGeoDenver 2007 Conference: 18 February 2007, Denver, U.S.A.
Pages17; # of pages: 7
AbstractThis paper presents a numerical technique to simulate the resilient modulus test of aggregate materials based on the discrete element method. This technique enables a realistic modeling that takes into account the nature of the materials and loading conditions, and provides valuable information such as the grain rearrangement at the micro level. Numerical simulations were conducted to idealize the cyclic loading of compacted granular samples. These simulations showed that the discrete element method is capable of reproducing the results of the resilient modulus test and capturing the effect of confining pressure on the resilient modulus observed in actual laboratory testing. The resilient modulus exhibited an increase in value with the increase of the confining pressure. The results also showed that the deviator stress has an effect only at low confining pressures.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number49204
NPARC number20377093
Export citationExport as RIS
Report a correctionReport a correction
Record identifierdc83a68e-5d75-4bfa-9474-15ad3f663682
Record created2012-07-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: