Numerical investigation of thermal response of basement wall systems with low emissivity material and furred airspace

  1. (PDF, 1 MB)
AuthorSearch for: ; Search for: ; Search for:
Conference13th Canadian Conference on Building Science and Technology: 10 May 2011, Winnipeg, Manitoba
Pages113; # of pages: 13
Subjectnumerical simulation, CFD, thermal modeling, basement, above-grade, below-grade, low emissivity, furred-air space; Walls
AbstractIn basement wall systems, airspaces can contribute in obtaining a higher thermal resistance, if a reflectivematerial such as reflective foil is installed on one side or the other of a furred-airspace. In this paper, thehygIRC-C model was used to investigate the steady-state and transient thermal performance of abasement wall system that incorporate foil bonded to expanded polystyrene (EPS) foam in a furred assembly having airspace next to the foil. The furring was installed horizontally. The external layer ofthis wall is a poured-in-place concrete. Walls with and without Furred-Airspace Assembly (FAA) wereconsidered in this study. Also, consideration was given to investigate the effect the above- and below grade portions of the wall on the thermal performance when these walls were subjected to a Canadianclimate. Results showed that the effective thermal resistance of a wall with FAA at steady-state conditiondepends on the soil, outdoor and indoor temperatures. Additionally, a wall with FAA and low foilemissivity (0.04) bonded to EPS foam resulted in an energy saving of 17.7% compared to a wall withoutFAA when these walls are subjected to the same climate condition.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number54430
NPARC number20374610
Export citationExport as RIS
Report a correctionReport a correction
Record identifierd0606ede-8e51-4bbc-8266-4c0102a61915
Record created2012-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: