Mechanical properties of fibre reinforced polymer reinforcing bars at elevated temperatures

  1. (PDF, 444 KB)
AuthorSearch for: ; Search for: ; Search for:
ConferenceSFPE/ASCE Specialty Conference: Designing Structures for Fire: 30 September 2003, Baltimore, MD
Pages183192; # of pages: 10
SubjectFibre-reinforced polymers (FRP); Fibre-reinforced polymers (FRP); Concrete
AbstractThis paper presents the results of an experimental study of the mechanical properties of FRP reinforcement bars, used as internal reinforcement in concrete structures, at elevated temperatures. Two types of FRP bars namely: carbon fibre reinforced polyester bars of 9.5mm diameter and glass fibre reinforced polyester bars of 9.5mm and 12.7 mm diameter were used in the study. For comparison, conventional steel reinforcement bars of 10mm and 15mm diameter were also tested. Results from the experimental study show that the stress-strain relationships of FRP bars remained almost linear at elevated temperatures until failure. However, there was a gradual reduction in the failure strength of FRP bars at elevated temperatures, at an almost linear rate to zero at about 500oC. Their elastic modulus remained almost unchanged until 300oC-400oC. After this temperature, there was a sharp drop in the elastic modulus. These properties can be used as input in computer programs for modelling the fire behaviour of concrete structural members reinforced with FRP bars.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number47020
NPARC number20377181
Export citationExport as RIS
Report a correctionReport a correction
Record identifiercb9184e7-2c17-4cb6-9bc8-4e414c478613
Record created2012-07-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: