Low angle scouring erosion behaviour of elastomeric materials

  1. Get@NRC: Low angle scouring erosion behaviour of elastomeric materials (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1016/j.wear.2010.12.057
AuthorSearch for:
Journal titleWear
Pages14111417; # of pages: 7
SubjectCoriolis; Elastomeric materials; Erodent; Erosion resistance; Hard material; High velocity; Impingement angle; Jet devices; Material removal; New specimen; Slurry erosion; Slurry flow; Specimen surfaces; Tubular component; Wear mechanisms; White iron; Elastomers; Hardness; Plastics; Storms; Tribology; Erosion
AbstractElastomers are a particularly important class of material, finding increasing utilization in applications such as piping and tubular components; pumps; valves and cyclones; where considerable resistance to low angle scouring erosion is critical. Assessment of elastomers at impingement angles >10° has been readily available using various slurry jet devices, however, there is a clear need for a suitable method for evaluating these materials under conditions of high velocity, low angle (<10°) impingement.Based on this requirement, a new specimen holder was developed for the Coriolis slurry erosion tester. This rig has previously been shown to provide a convenient and repeatable method for evaluating the scouring erosion resistance of a variety of hard materials [1]; however, until recently the capability to assess elastomeric materials was hindered by the distortion of specimens when the holding force was applied. The new holder alleviates this problem and ensures improved control of the slurry flow over the specimen surface thus producing consistent and reproducible erosion scars, which can be used for determining the expected wear of elastomers under conditions of low angle erosion.The current work examines the scouring erosion resistance and mechanisms of material removal for selected elastomers and compares data with that of various white irons, steels, cermets and overlays. The influence of erodent type on the resulting wear mechanisms has also been examined. Results have enabled correlations to be made between scouring erosion attack resistance, hardness and material type. © 2011.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC)
Peer reviewedYes
NPARC number21271647
Export citationExport as RIS
Report a correctionReport a correction
Record identifierc9b76dc4-cc44-4ca4-9d13-4ceaa7d203e9
Record created2014-03-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: