Analysis of the stress-free interplanar spacing during solution heat treatment of 319 Al alloy engine blocks via in-situ neutron diffraction

AuthorSearch for: ; Search for: ; Search for: ; Search for:
Proceedings titleMaterials Science & Technology Conference and Exhibition 2013
ConferenceMaterials Science and Technology Conference and Exhibition 2013, October 27-31 2013, Montreal, QC, Canada
SubjectEngine blocks; Heat treatment parameters; In-situ neutron diffraction; Interplanar spacings; Vehicle fuel efficiencies; Engine cylinders
AbstractAluminum alloy engine blocks have successfully replaced ferrous materials in order to maximize weight savings and improve vehicle fuel efficiency. However, the development of an optimal heat treatment process is required to improve engine block casting integrity and prevent potential problems such as in-service cylinder distortion. Optimization of heat treatment parameters requires an in-depth study to determine how residual stresses are relieved with time during solution heat treatment. In order to perform this analysis, however, in-situ neutron diffraction must first be carried out on stress-free samples of the same composition and processing history as the engine blocks to account for factors such as thermal expansion and changes in lattice parameter due to dissolution of secondary phases. The results from this study suggest that thermal expansion caused the largest change in d0 spacing, while prolonged exposure to solution temperatures of 470 and 500 °C did not cause significant changes in d0.
Publication date
PublisherMaterials Science and Technology
AffiliationNational Research Council Canada; Security and Disruptive Technologies
Peer reviewedYes
NPARC number23000458
Export citationExport as RIS
Report a correctionReport a correction
Record identifierc861d3c9-80a4-4f3e-b00f-f445096dcfa0
Record created2016-07-20
Record modified2016-07-20
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: