Infrared and Millimeter-Wave Study of the Four Lowest Torsional States of CH3CF3

  1. Get@NRC: Infrared and Millimeter-Wave Study of the Four Lowest Torsional States of CH3CF3 (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
Journal titleJournal of Molecular Spectroscopy
Pages146163; # of pages: 18
Subjectinternal rotation; torsion; vibration; 1,1,1-trifluoroethane; infrared; millimeter-wave
AbstractAn investigation of the torsion-rotation Hamiltonian of CH3CF3 in the ground vibrational state has been carried out using infrared and mm-wave spectroscopy. With infrared Fourier transform spectroscopy, the weak, torsional overtone (v6 = 2 <-- 0) has been studied leading to the measurement of 382 frequencies between 405 and 440 cm-1 at a resolution of 0.005 cm-1. Torsional splittings on the order of 0.03 cm-1 were observed. With mm-wave methods, a total of 669 rotational transitions between 50 and 360 GHz have been measured at Doppler-limited resolution in the four lowest torsional states v6 = 0, 1, 2, 3. The experimental uncertainty attained for an isolated line was better than 10 kHz below 150 GHz, and somewhat larger at higher frequencies. For v6 = 3, torsional splittings as large as 8.7 MHz were observed. The global data set consisted of the current frequency determinations and the 443 measurements with molecular beam, microwave, and mm-wave methods analyzed by I. Ozier, J. Schroderus, S.-X. Wang, G. A. McRae, M. C. L. Gerry, B. Vogelsanger, and A. Bauder [J. Mol. Spectrosc. 190, 324-340 (1998)]. The observation of mm-wave R-branch transitions for v6 = 1 led to a change in the J-assignment of the forbidden ([Delta]k = ?3) transitions reported earlier for this torsional state. A good fit was obtained by varying 24 parameters in a Hamiltonian that represented both the torsional effects and the sextic splittings. In the earlier work, the large reduced barrier height led to high correlations among several of the torsional distortion constants. With the current measurements, many of these correlations are substantially reduced. Improved effective values were determined for the height V3 of the hindering barrier and the first-order correction V6 in the Fourier expansion of the potential function. The dipole function which characterizes the transition moment of the torsional overtone (v6 = 2 <-- 0) can be written as the product of a single effective dipole constant [mu]T0,eff and the appropriate off-diagonal matrix element of (1 - cos 3[alpha])/2, where [alpha] is the torsional angle. From an intensity analysis of the infrared spectrum, it has been determined that [mu]T0,eff = 85.3(62) mD. A novel approach based on a simple regrouping of angular momentum operators is introduced for decoupling the torsional and rotational degrees of freedom.
Publication date
AffiliationNational Research Council Canada; NRC Steacie Institute for Molecular Sciences
Peer reviewedNo
NPARC number12339021
Export citationExport as RIS
Report a correctionReport a correction
Record identifierbb32485e-4abc-4c75-8873-074bbeb55dbe
Record created2009-09-11
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: