Final Report from Task 8 of MEWS Project (T8-03) - Hygrothermal Response of Exterior Wall Systems to Climate Loading: Methodology and Interpretation of Results for Stucco, EIFS, Masonry and Siding-Clad Wood-Frame Walls

  1. (PDF, 5 MB)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
TypeTechnical Report
Series titleResearch Report (National Research Council Canada. Institute for Research in Construction); no. RR-118
Physical description1 v. (various pagings) p.
SubjectHygrothermal properties; Masony walls; Heat performance; Moisture performance
AbstractBy 1997, several field surveys in North America had indicated that rain penetration in exterior walls and poor construction detailing contributed to the shortening of the service life of recently built exterior walls of low-rise buildings in climates with high exterior moisture loads. There was a movement in industry to rethink the ways that exterior walls had been put together in recent years, as well as a renewed appreciation that exterior climates vary in severity from one location to another. In 1998, IRC/NRC initiated a research consortium with industry partners to develop guidelines for moisture management for exterior wall systems (MEWS) in low-rise residential buildings of North America. Partners represented the wood industry, manufacturers of cladding systems, insulation materials and water resistive barriers as well as building owners and managers. The project was broken down into several tasks, from a review of literature on current construction practice to experimental work in the laboratory and mathematical modelling. The following four types of cladding systems were included in the project: Portland cement plaster (stucco), Exterior Insulation and Finish Systems (EIFS), masonry and siding, over wood-frame construction.This TG8 report is a research document. The objectives of the report are three-fold: to describe the research approach in some detail (chapter 1), to summarize its application to the four types of wall assemblies (chapters 2 - 5) and to draw general conclusions (chapter 6), based on the observations in chapters 2 - 5. The reader is strongly advised to consult the research team before the information presented in this report is used for building design considerations.
Publication date
PublisherNational Research Council Canada
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedNo
NRC numberNRC-IRC-15157
NPARC number20386165
Export citationExport as RIS
Report a correctionReport a correction
Record identifierb6cd5f60-d4f4-4292-a964-2d33eaa3439c
Record created2012-07-25
Record modified2017-07-05
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: