Fire and acoustics research on load-bearing steel stud walls

  1. (PDF, 187 KB)
  2. Get@NRC: Fire and acoustics research on load-bearing steel stud walls (Opens in a new window)
Journal titleSolplan Review
IssueJuly 105
Pages1819; # of pages: 2
SubjectFire; Walls
AbstractIRC's Fire Risk Management Program, working with nine industry partners, conducted 14 full-scale standard tests to study the effect of various parameters on the fire resistance of load-bearing steel-stud wall assemblies. Test parameters included the spacing of steel studs; the number of stud rows (i.e., single- versus double-stud walls); the number of gypsum board layers (i.e., one versus two layers of protection); the use of cross-bracing; the replacement of one layer of gypsum board with an oriented strand board (OSB) shear membrane; the use of resilient metal channels to support the gypsum board; and the type of insulation used in the wall cavity. Each full-scale assembly was exposed to a standard fire in a propane-fired vertical furnace until it failed in one of three ways: structural failure; exceeding a specified temperature; flame or gas penetration. In all cases, the wall assemblies failed structurally. The unexposed surface temperature at this time was below the temperature criteria for failure.
Publication date
AffiliationNational Research Council Canada
Peer reviewedNo
NRC publication
This is a non-NRC publication

"Non-NRC publications" are publications authored by NRC employees prior to their employment by NRC.

NRC number14973
NPARC number20378851
Export citationExport as RIS
Report a correctionReport a correction
Record identifierb6a43485-b12d-4513-b7bd-f28bc0068388
Record created2012-07-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: