Radial crack length during indentation of ice with Vickers indentor

AuthorSearch for:
Conference8th International Conference on Offshore Mechanics and Arctic Engineering, 19-23 March 1989, The Hague, The Netherlands.
Subjectfracture; damage; hardness
AbstractA Vickers indenter was used on ice over a range of loads from 100 to 1200 N at -15C, and the length versus indenter load was empirically determined. The lower limit to the piece size of the crushed particles was measured as 75 ± 41 µm, in good agreement with a calculated value. Using a previously determined arrest stress intensity factor and the crack length data, an estimate of the damage zone beneath the indenter was made, and it was found to be much smaller than that based on an elastic/plastic cavity analysis. A mechanism for inelastic energy absorption in ice is proposed.
Publication date
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number5208
NPARC number8895860
Export citationExport as RIS
Report a correctionReport a correction
Record identifieradf3b2e9-4e67-4be6-a432-ed3251576607
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: