Determination of trace elements in fluoropolymers after microwave-induced combustion

  1. (PDF, 802 KB)
  2. Get@NRC: Determination of trace elements in fluoropolymers after microwave-induced combustion (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
Journal titleAnalytical Chemistry
Pages374380; # of pages: 7
SubjectAbsorbing medium; Acid extraction; Analytes; Closed systems; Fluorinated ethylene propylene; Inductively-coupled; Microwave-assisted; Microwave-induced combustion; Residual carbon; Sample holders; Combustion; Inductively coupled plasma; Manganese; Mass spectrometry; Nitric acid; Quartz; Fluorine containing polymers; politef; silicon dioxide; microwave radiation; neutron; Mass Spectrometry; Microwaves; Neutrons; Nitric Acid; Polytetrafluoroethylene; Quartz; Trace Elements
AbstractAn effective approach to the digestion of fluoropolymers for the determination of Ag, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, and Ni impurities has been developed using microwave-induced combustion (MIC) in closed quartz vessels pressurized with oxygen. Samples that were examined included the following: polytetrafluorethylene (PTFE); polytetrafluoroethylene with an additional modifier, perfluoropropylvinylether (PTFE-TFM); and fluorinated ethylene propylene (FEP). A quartz device was used as a sample holder, and the influence of the absorber solution was evaluated. Determination of trace elements was performed by inductively coupled plasma-optical emission and mass spectrometry. Neutron activation analysis (NAA) was used for validation purposes. Results were also compared to those obtained using microwave-assisted acid extraction in high-pressure closed systems. Dilute nitric acid (5 mol L-1), which was selected as the absorbing medium, was used to reflux the sample for 5 min after the combustion. Using these conditions, agreement for all analytes was better than 98% when compared to values determined by NAA. The residual carbon content in the digests was lower than 1%, illustrating the high efficiency of the method. Up to 8 samples could be digested within 30 min using MIC, providing a suitable throughput, taking into account the inertness of such samples.
Publication date
AffiliationMeasurement Science and Standards; National Research Council Canada
Peer reviewedYes
NPARC number21270354
Export citationExport as RIS
Report a correctionReport a correction
Record identifier8990edfc-86d2-45e9-8d06-d198dae9f29e
Record created2014-02-04
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: