Packaging of photonic components VII: the process for coupling optical fibers to planar waveguides with thermal curing adhesives

DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
Proceedings titlePhotonics North 2004: Optical Components and Devices (Proceedings Volume)
Proceedings of SPIE
ConferencePhotonics North 2004: Optical Components and Devices, 27 September 2004, Ottawa, Canada
Pages870877; # of pages: 8
AbstractOur developed thermal curing adhesives were reported having excellent performance in coupling optical fibers to waveguides. The fiber-to-waveguide coupling process based on these adhesives was reported in this paper. The process consisted of three major steps in the process, including loading waveguide dies and fiber arrays onto the sample holders, aligning the fibers to waveguides at a constant temperature to reach minimum loss, bonding the fiber arrays to waveguide dies. The sample holders, which used ceramic spaces to isolate heat and springs to damp stress, were specially designed to keep fiber arrays and waveguide dies at a constant temperature up to 120°C with minimum shift. When the fiber arrays and waveguide dies were equilibrated with the set temperature, a rough alignment was conducted manually, followed by an automatic alignment controlled by a Melles Griot system. Then, the adhesives with proper viscosity and curing rate were applied to the gaps between fiber array and waveguide dies to bond them together. The curing temperature was optimized by studying the adhesives’ curing kinetics with a DSC, so that the adhesives could be distributed rapidly and cured at a speed that still allowed a small alignment adjustment during the curing. A post-thermal treatment process was developed to build the maximum bonding strength for the fiber-coupled devices.
Publication date
AffiliationNRC Institute for Microstructural Sciences; National Research Council Canada; NRC Institute for National Measurement Standards
Peer reviewedNo
NPARC number12346354
Export citationExport as RIS
Report a correctionReport a correction
Record identifier779b538d-03ee-4a08-9d5a-fa3c898cf415
Record created2009-09-17
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: