On the Measurement of Propeller Blade Bending for Model Scale Experiments

AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for:
ConferenceInternational Shipbuilding Conference, St. Petersburg, Russia (Federation), 1994
Subjectmodel propeller; blade bending; finite element analysis; strain gauges; optimization
AbstractPropeller open water tests in ice were carried out at the Institute for Marine Dynamics as part of a Joint Research Project Arrangement on propeller and ice interaction. Two different propeller models were examined, one open and one ducted, which are typical of conventional controllable-pitch icebreaker propellers. Strain gauge instrumentation was utilized to record the stresses on one of the blades of the propellers. These stresses were translated to blade bending moments through a set of influence coefficients. Finite element techniques were employed to determined the blade bending strain gauge locations. This paper describes the methodology used to evaluate the instrumentation for the measurement of the out of plane blade bending loads on the propeller blades.
Publication date
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number5875
NPARC number8896276
Export citationExport as RIS
Report a correctionReport a correction
Record identifier76402577-fe6c-4432-a178-eb178e7d98dd
Record created2009-04-22
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: