Impact of initial surface parameters on the final quality of laser micro-polished surfaces

DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for:
Proceedings titleProceedings of SPIE 8248
ConferenceSPIE 8248, Micromachining and Microfabrication Process Technology XVII, January 21, 2012, San Francisco, CA, USA
AbstractLaser micro-polishing (LμP) is a new laser-based microfabrication technology for improving surface quality during a finishing operation and for producing parts and surfaces with near-optical surface quality. The LμP process uses low power laser energy to melt a thin layer of material on the previously machined surface. The polishing effect is achieved as the molten material in the laser-material interaction zone flows from the elevated regions to the local minimum due to surface tension. This flow of molten material then forms a thin ultra-smooth layer on the top surface. The LμP is a complex thermo-dynamic process where the melting, flow and redistribution of molten material is significantly influenced by a variety of process parameters related to the laser, the travel motions and the material. The goal of this study is to analyze the impact of initial surface parameters on the final surface quality. Ball-end micromilling was used for preparing initial surface of samples from H13 tool steel that were polished using a Q-switched Nd:YAG laser. The height and width of micromilled scallops (waviness) were identified as dominant parameter affecting the quality of the LμPed surface. By adjusting process parameters, the Ra value of a surface, having a waviness period of 33 μm and a peak-to-valley value of 5.9 μm, was reduced from 499 nm to 301 nm, improving the final surface quality by 39.7%.
Publication date
AffiliationAutomotive and Surface Transportation; National Research Council Canada
Peer reviewedYes
NPARC number21275105
Export citationExport as RIS
Report a correctionReport a correction
Record identifier70ceb23a-3269-4164-abcc-217b9bdb7041
Record created2015-05-07
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: