Bending wavenumber and associated damping

  1. (PDF, 823 KB)
AuthorSearch for: ; Search for:
ConferenceProceedings of International Congress on Sound and Vibration: 02 July 2006, Vienna, Austria
Pages18; # of pages: 8
Subjectflanking, model, prediction, periodic structure, vibration; Vibrations
AbstractThis paper outlines and evaluates a non-destructive experimental technique used to obtain in-situ measures of the real part of the bending wavenumber in the two principal directions of a wood joist floor. Measurements confirm the highly orthotropic nature when the floor is bare, without topping. Wavenumbers in the direction parallel to the joists are a function of location between the joists. Lower wavenumbers in this direction can be expected closer to the joists. A floor topping is shown to significantly modify the wavenumbers in the exposed surface; with a topping, the floor is less orthotropic. Changes in measured wavenumbers due to adding a topping are shown to correlate well with the changes in vibration distribution and rates of structure borne attenuation. Finally, measured wavenumbers and vibration levels are combined to obtain with theory to obtain an estimate of the loss factor that agrees well with that measured by the power injection method.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedNo
NRC number47679
NPARC number20377462
Export citationExport as RIS
Report a correctionReport a correction
Record identifier6823bf44-4ac7-4c2b-b682-918fe2b9fcea
Record created2012-07-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: