MOCVD based zinc diffusion process for planar InP/InGaAs avalanche photodiode fabrication

DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Conference2012 24th International Conference on Indium Phosphide & Related Materials (IPRM), 2012-08-27 - 2012-08-30, Santa Barbara, CA, USA
Pages225228; # of pages: 4
SubjectDiffusion processes; dark current; epitaxial layers; photodiodes
AbstractWe investigated the diffusion of zinc into InP/InGaAs avalanche photodiode structures using dimethylzinc in an MOCVD reactor. Diffusion profiles were measured by secondary ion mass spectrometry and compared with cleaved cross-sections imaged by scanning electron microscopy, in order to accurately target the diffusion depth for device fabrication. The dependence of the diffusion depth on the diffusion temperature, partial pressures of dimethylzinc and phosphine, and diffusion time is reported. Diffused devices exhibit, in some cases, a step increase in dark current at or near the punch-through voltage. We show that the dark current above the punch-through voltage is proportional to the junction area and originates in the bulk of the material. The dependence of this bulk dark current contribution on the diffusion process parameters has been studied in detail, and a reduction of three orders of magnitude was achieved.
AffiliationInformation and Communication Technologies; National Research Council Canada
Peer reviewedYes
NPARC number21269124
Export citationExport as RIS
Report a correctionReport a correction
Record identifier5569572c-0825-4e16-912f-6d47a092fb79
Record created2013-12-06
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: