Effect of joist length on sound transmission through wood joist floors

  1. (PDF, 241 KB)
AuthorSearch for:
ConferenceInter-Noise '96: 30 July 1996, Liverpool, England
Pages18411846; # of pages: 6
AbstractThe construction of a new floor facility at NRC [1] presented an opportunity to compare sound transmission data for similar floors measured in two rather different facilities. Two issues to be resolved were whether specimen size or room volume influences the results of standard tests from 100 Hz to 4000 Hz or the results of experimental impact sound measurements at frequencies down to 50 Hz or less. An earlier paper [2] presented some early comparisons of airborne and impact sound transmission for nominally identical floors measured in the two facilities. That paper also presented sound transmission results for a wood joist floor that had been sawn into two pieces along a line parallel to the joists and each piece tested separately. Other work [3] had suggested that there ought to be a strong relationship between sound transmission at low frequencies and joist dimensions. This paper presents some sound transmission results for a floor that was progressively made smaller by sawing through the joists. As well some further comparisons between results obtained in the two NRC floor testing suites are presented.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number39835
NPARC number20358681
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4de2a046-c85d-4252-a48c-ff77903629b4
Record created2012-07-20
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: