Morphological aspects of injected polypropylene/clay nanocomposite materials

  1. Get@NRC: Morphological aspects of injected polypropylene/clay nanocomposite materials (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Journal titlePolymer Engineering and Science
Pages905913; # of pages: 9
SubjectClay intercalation; Clay nanocomposites; Crystallization behavior; Injection-molded specimens; Low-molecular weight; Molecular chain orientation; Morphological aspects; Transmission electron microscopy (TEM); Coupling agents; Crystallization; Differential scanning calorimetry; Molecular weight; Nanocomposites; Polypropylenes; Scanning electron microscopy; Transmission electron microscopy; X ray diffraction; Injection molding
AbstractPolypropylene (PP) clay nanocomposites were injection-molded using two different coupling agents based on maleic anhydride-grafted PP (MA-g-PP) and two clay loadings. The morphological aspects of these materials were studied by depth profiling. Molecular chain and clay orientations were characterized using attenuated total reflectance-infrared analysis and transmission electron microscopy (TEM). Both clay platelets and PP molecular chain orientations were found to decrease from the surface toward the core of the injection-molded specimens. Clay intercalation, characterized by both complementary X-ray diffraction and TEM, was found to be significantly influenced by both the characteristics of the coupling agent used and the type of residual stresses generated at each layer across the thickness of the injection-molded parts. The use of low-molecular weight (Mw) MA-g-PP led to a uniform intercalation but with no further exfoliation. The use of higher molecular weight MA-g-PP led to a heterogeneous intercalation with some signs of exfoliation. The crystallization behavior of PP clay nanocomposites studied by differential scanning calorimetry showed an increase in the level of crystallinity from the surface to the core of the specimens; these results were also confirmed by scanning electron microscopy. Copyright © 2012 Society of Plastics Engineers.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); NRC Industrial Materials Institute (IMI-IMI)
Peer reviewedYes
NPARC number21269969
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4a18513f-6679-4b51-ba1b-45d746004cbc
Record created2013-12-13
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: