An investigation on the coating of 3003 aluminum alloy

  1. (PDF, 1 MB)
  2. Get@NRC: An investigation on the coating of 3003 aluminum alloy (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for:
Journal titleSurface and Coatings Technology
Pages431443; # of pages: 13
Subjectrinsing; immersion; electroless; aluminum
AbstractA new approach to reduce the decomposition of electroless Ni–P deposition solution during coating of 3003 aluminum alloy was verified. This new approach uses an immersion coated Cu layer to protect the subsequent electroless deposition solution from being contaminated by the dissolution of substrate. Water rinsing of pretreated 3003 Al substrate prior to immersion coating was, however, found to have an effect on the subsequent immersion coating process, and a new rinsing process with significant beneficial effect was developed. AFM and SEM were used to observe the effect under different conditions. XPS was applied to study the surface changes so as to understand the effect. Successful rinsing yielded satisfactory immersion copper coating, which was, in turn, found beneficial to the stability of the subsequent electroless deposition bath.
Publication date
AffiliationNRC Industrial Materials Institute; National Research Council Canada
Peer reviewedYes
NPARC number21272526
Export citationExport as RIS
Report a correctionReport a correction
Record identifier4566f8e7-1fe8-4973-b88b-670d96c26afe
Record created2014-12-01
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: