Weathering rack for sealants

  1. (PDF, 793 KB)
  2. Get@NRC: Weathering rack for sealants (Opens in a new window)
AuthorSearch for: ; Search for: ; Search for:
Journal titleJournal of Coatings Technology
Pages4447; # of pages: 4
Subjectweathering; sealants; testing equipment; temperature range; aluminum; temperature change; sealant; concrete; thermocouples; gauges; temperature difference; exposure; Buildings; action des intemperies; mastic; materiel d'essai; champ de temperature
AbstractAn important factor influencing sealant performance on the outside of buildings is the cyclic movement induced by daily and yearly temperature changes. Although the sealant itself expands and contracts with temperature, these dimensional changes are negligible and largely reversed by changes in the building elements surrounding the joint. At the present time sealant manufacturers suggest that for the best quality sealants, joints should be designed with such width that the movement produced in them by the surrounding building elements will not be more than plus or minus 25% of the joint width. The exposure rack here described produces various amounts of movement covering a range reaching beyond 25%. The cyclic movement of the rack is produced by changes in weather conditions that induce different amounts of movement in two kinds of metal used in the construction of the rack.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number15948
NPARC number20374368
Export citationExport as RIS
Report a correctionReport a correction
Record identifier3f49cb0e-d201-4417-8cd9-10cf15d83c66
Record created2012-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: