Heat transfer Simulation to determine the impact of Al-5Mg arc sprayed coating onto 7075 T6 alloy fatigue performance

  1. (PDF, 548 KB)
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Proceedings title11th International LS-DYNA Users Conference 2010 : June 6-8, 2010, Dearborn, Michigan, USA
Conference11th International LS-DYNA Users Conference, LSTC, June 6-8, 2010, Dearborn, Michigan, USA
SubjectHeat transfer simulation; aluminum; Al5-Mg; Arc spray coating; 7075 T6 Alloy; Fatigue performance; déposition à l'arc; revêtement; alliage; aluminium
AbstractAluminum-5% magnesium coatings was deposited by arc spraying onto aircraft Al 7075 T651 structural alloy for corrosion protection while required to maintain the substrate material fatigue performance integrity. Fatigue performance of coating system is complex and in order to better understand the variability of the fatigue performance of coatings, heat flow in substrate was studied and simulated to determine the temperature evolution during arc spraying in both substrate and coating for different process parameters. Experimental temperature measurements, theoretical calculations and simulation were carried out to extrapolate the coating temperature with respect to coating process variables and surface preparation. Both flux and conductance were identified by an inverse method to reproduce experimental temperature measurements. The thermal transient solver of LS-DYNA® was used to simulate the time-dependence of heat flux in the coating during successive depositions. The benefit of that model is its capability to predict the temperature distribution and evolution in time in a sample. Samples were made of Al 7075 T651 alloy and were 80 mm in length by 25 mm wide and 7 mm thick. A coating thickness of 250 μm was reached. It was the spray thermal energy that was taken into account in the model as the thermal load. The quality of the thermal contact between the substrate and coating was also included in the model and conductance was defined to control the amount of heat transferred at the interface. Coating performance was evaluated in term of fatigue properties, bond strength, and interface quality of as deposited coatings. The superior fatigue resistance of the coated alloy relies on low heat input process parameters and surface preparation that favor high interface conductance to keep low coating temperature during the coating process. Surface preparation, arc current and atomizing gases play all a key role to provide a fatigue resistant coating.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); NRC Industrial Materials Institute
Peer reviewedYes
NRC number51119
NPARC number15888612
Export citationExport as RIS
Report a correctionReport a correction
Record identifier3c7b512c-7ce2-47bc-9db5-b870e910326d
Record created2010-07-29
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: