Characterization of Electron Beam Welded 17-4 PH Stainless Steel

  1. Get@NRC: Characterization of Electron Beam Welded 17-4 PH Stainless Steel (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for:
Journal titleCanadian Metallurgical Quarterly
Pages413435; # of pages: 23
Subjectstainless steel; captive trajectory system
AbstractThe Canadian Department of National Defence (DND) currently has a requirement for a fully automated captive trajectory system (CTS) with six degrees of freedom, all of which are to be motorized, to study the movement of stores (such as missiles) during carriage/release testing of F-18 and other military aircraft in the National Research Council (NRC) trisonic blowdown wind tunnel. In the CTS, one of the joints providing linear motion is designed and fabricated with a linkage (telescoping inner strut (TIS)) in two halves, split along its neutral plane, to allow machining of the internal geometry. To support the dynamic, kinematic and aerodynamic loads induced, the two halves must be welded together while maintaining high tolerances on the inner geometry. The designed weld areas on the neutral plane require a penetration of 17.1 mm from each face in 17-4 precipitation hardening (PH) martensitic stainless steel (SS). Using conventional joining techniques, such as tungsten inert gas (TIG) welding, the fabrication of a thick section requires a V groove joint design and multiple passes to achieve the required penetration. However, exposure to a substantial heat input through this process renders large weld and heat affected zones on either face of the strut as well as distortion of the component, which poses considerable difficulties for assembly and motion. The application of a high energy density technique, namely electron beam (EB) welding, was utilized to penetrate the thick section with a single pass, while minimizing the weld region, heat affected zone (HAZ) and distortion of the strut (low heat input).
Publication date
AffiliationNRC Institute for Aerospace Research; National Research Council Canada
Access conditionavailable
Peer reviewedNo
NRC numberAMTC-2008-0005
NPARC number8927078
Export citationExport as RIS
Report a correctionReport a correction
Record identifier397195de-ed9c-43de-a604-f1b6d18c6a1d
Record created2009-04-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: