Calibration of a heat flow meter apparatus

  1. (PDF, 656 KB)
  2. Get@NRC: Calibration of a heat flow meter apparatus (Opens in a new window)
DOIResolve DOI:
AuthorSearch for: ; Search for: ; Search for: ; Search for:
Journal titleJournal of Thermal Insulation and Building Envelopes
Pages128144; # of pages: 17
SubjectThermal Insulation; Building Envelope; Enveloppe du bâtiment
AbstractA series of calibration measurements was done on a 600 mm x 600 mm heat flow meter apparatus. Several specimens of medium density glass fiber insulation and expanded polystyrene insulation were used as transfer standards. The thickness of these transfer standards varied from 25 to 160 mm. The mean temperature varied from 0 to 40 C and the temperature difference across the insulation specimens varied from 10 to 40 K. Measurements included cases in which the ambient temperature of the test assembly was either maintained within 1 K of the mean temperature, or those with only edge insulation, and an enclosure for the whole test assembly in order to reduce the edge heat losses.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number37906
NPARC number20375239
Export citationExport as RIS
Report a correctionReport a correction
Record identifier3295fc5b-09f4-46a3-b8e5-8103b412ba44
Record created2012-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: