Vibration criteria for long-span concrete floors

  1. (PDF, 1 MB)
  2. Get@NRC: Vibration criteria for long-span concrete floors (Opens in a new window)
AuthorSearch for: ; Search for: ; Search for:
ConferenceProceedings of the ACI Symposium on Vibrations of Concrete Structures: 20 October 1977, New Orleans, LA, USA
Pages6778; # of pages: 12
Subjectconcrete joist floors; vibrations; criteria; precast concrete; beams (supports); concrete slabs; criteria; floors; human factors engineering; long span; precast concrete; reinforced concrete; vibrations; Vibrations; plancher a poutrelles beton; vibration (onde); critere; beton prefabrique
AbstractCriteria derived originally for walking vibrations in long- span steel joist floors with concrete deck are applied, with some adjustments, to long-span concrete floors. Field studies of two precast and one cast-in-place floor system are used to verify criteria and to estimate vibration parameters. Because of its relatively large mass and inherent stiffness to short-term load, cast-in-place construction generally is not prone to unsatisfactory vibration for normal human occupancy. The trend toward longer spans, less damping and thinner sections could result in problems if special care is not taken in the design. Also longer spans with lower frequencies can result in serious resonance problems in occupancies where repeated human activities such as dancing, clapping or stomping can occur.
Publication date
AffiliationNRC Institute for Research in Construction; National Research Council Canada
Peer reviewedYes
NRC number17662
NPARC number20373936
Export citationExport as RIS
Report a correctionReport a correction
Record identifier1a0c2c9a-980d-4401-b902-033c16a11509
Record created2012-07-23
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: