A fundamental study of chitosan/PEO electrospinning

  1. Get@NRC: A fundamental study of chitosan/PEO electrospinning (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1016/j.polymer.2011.08.034
AuthorSearch for: ; Search for: ; Search for:
Journal titlePolymer
Pages48134824; # of pages: 12
SubjectAcid concentrations; Additivity rules; Blend composition; Chain stiffness; Chitosan molecule; Defect-free; Diameter reduction; Electrospinnability; Electrospinning process; Electrospun fibers; Electrospuns; Limiting factors; Moderate temperature; Polymer content; Positive charges; Rheological property; Solution property; Zero shear viscosity; Acetic acid; Electrospinning; Hydrogen; Hydrogen bonds; Nanofibers; Polyethylene oxides; Polymer blends; Rheology; Surface tension; Textile blends; Viscometers; Viscosity; Chitosan
AbstractA highly deacetylated (97.5%) chitosan in 50% acetic acid was electrospun at moderate temperatures (25-70 °C) in the presence of a low content of polyethylene oxide (10 wt% PEO) to beadless nanofibers of 60-80 nm in diameter. A systematic quantitative analysis of the solution properties such as surface tension, conductivity, viscosity and acid concentration was conducted in order to shed light on the electrospinnability of this polysaccharide. Rheological properties of chitosan and PEO solutions were studied in order to explain how PEO improves the electrospinnability of chitosan. Positive charges on the chitosan molecule and its chain stiffness were considered as the main limiting factors for electrospinability of neat chitosan as compared to PEO, since surface tension and viscosity of the respective solutions were similar. Various blends of chitosan and PEO solutions with different component ratios were prepared (for 4 wt% total polymer content). A significant positive deviation from the additivity rule in the zero shear viscosity of chitosan/PEO blends was observed and believed to be a proof for strong hydrogen bonding between chitosan and PEO chains, making their blends electrospinnable. The impact of temperature and blend composition on the morphology and diameter of electrospun fibers was also investigated. Electrospinning at moderate temperatures (40-70 °C) helped to obtain beadless nanofibers with higher chitosan content. Additionally, it was found that higher chitosan content in the precursor blends led to thinner nanofibers. Increasing chitosan/PEO ratio from 50/50 to 90/10 led to a diameter reduction from 123 to 63 nm. Producing defect free nanofibrous mats from the electrospinning process and with high chitosan content is particularly promising for antibacterial film packaging and filtration applications. © 2011 Elsevier Ltd. All rights reserved.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); NRC Industrial Materials Institute (IMI-IMI)
Peer reviewedYes
NPARC number21271485
Export citationExport as RIS
Report a correctionReport a correction
Record identifier07807ece-4bd6-496a-96e7-86a26581e47c
Record created2014-03-24
Record modified2016-05-09
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: