Flexure mount for a MEMS deformable mirror for the GPI Planet Imager

  1. Get@NRC: Flexure mount for a MEMS deformable mirror for the GPI Planet Imager (Opens in a new window)
DOIResolve DOI: http://doi.org/10.1117/12.926842
AuthorSearch for: ; Search for: ; Search for: ; Search for: ; Search for: ; Search for:
Proceedings titleSPIE - International Society for Optical Engineering. Proceedings
ConferenceModern Technologies in Space- and Ground-Based Telescopes and Instrumentation II, 1 July 2012 through 6 July 2012, Amsterdam
Article number84500H
SubjectAdaptive optics systems; Deformable mirrors; Field application; Flexure mounts; Flexures; Gravity vectors; Laboratory environment; Laboratory set-up; Mechanical design; MEMS deformable mirror; MEMS DM; Micromachines; Mirror surfaces; Optical mountings; Optical surfaces; Opto-mechanical mount; Opto-mechanical mounting; Preliminary design; Thermal condition; Thermal fluctuations; Thermally stable; Adaptive optics; Electromechanical devices; Finite element method; Laser pulses; MEMS; Optical telescopes; Telescopes; Mountings
AbstractSmall deformable mirrors (DMs) produced using microelectromechanical systems (MEMS) techniques have been used in thermally stable, bench-top laboratory environments. With advances in MEMS DM technology, a variety of field applications are becoming more common, such as the Gemini Planet Imager's (GPI) adaptive optics system. Instruments at the Gemini Observatory operate in conditions where fluctuating ambient temperature, varying gravity orientations and humidity and dust can have a significant effect on DM performance. As such, it is crucial that the mechanical design of the MEMS DM mount be tailored to the environment. GPI's approach has been to mount a 4096 actuator MEMS DM, developed by Boston Micromachines Corporation, using high performance optical mounting techniques rather than a typical laboratory set-up. Flexures are incorporated into the DM mount to reduce deformations on the optical surface due to thermal fluctuations. These flexures have also been sized to maintain alignment under varying gravity vector orientations. This paper is a follow-up to a previous paper which presented the preliminary design. The completed design of the opto-mechanical mounting scheme is discussed and results from finite element analysis are presented, including predicting the stability of the mirror surface in varying gravity vectors and thermal conditions. © 2012 SPIE.
Publication date
AffiliationNational Research Council Canada (NRC-CNRC); NRC Herzberg Institute of Astrophysics (HIA-IHA)
Peer reviewedYes
NPARC number21269320
Export citationExport as RIS
Report a correctionReport a correction
Record identifier043e643d-0826-4634-acbf-40ece425fd7a
Record created2013-12-12
Record modified2017-04-24
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: