Vibration analysis: determining causes of excess vibration

AuthorSearch for:
TypeTechnical Report
Series titleLaboratory Memorandum
SubjectVibration analysis
AbstractVibration analysis is a powerful tool, which can be used to determine if a machine is experiencing any problems. This is done through the use of a vibration analyzer, along with a transducer, which converts the mechanical vibration to an electrical signal. When the data is fully collected it needs to be analyzed to determine the cause of these vibrations. The most common causes of vibration in most machines are: unbalance, misalignment, mechanical looseness, and faulty bearings. If the vibration is excessive, corrective action should be taken to reduce the vibration. If this excessive vibration is not attended to, a mechanical failure will eventually occur. In order to prevent failure and to determine what state the machines are operating, the maintenance team at the Institute for Marine Dynamics conducted vibration analysis on a number of various rotating devices. From this, it was concluded that a small portion of the devices tested needed maintenance.
Publication date
PublisherNational Research Council Canada. Institute for Marine Dynamics
PlaceSt. John's, NL
AffiliationNRC Institute for Ocean Technology; National Research Council Canada
Peer reviewedNo
NRC number5879
NPARC number8895460
Export citationExport as RIS
Report a correctionReport a correction
Record identifier03ef56ae-532e-408d-9e48-c23af38fdf74
Record created2009-04-22
Record modified2016-10-03
Bookmark and share
  • Share this page with Facebook (Opens in a new window)
  • Share this page with Twitter (Opens in a new window)
  • Share this page with Google+ (Opens in a new window)
  • Share this page with Delicious (Opens in a new window)
Date modified: